Electronics Technology (ET) Courses
ET 140 Smart Computing Device System Repair I
- Units:4
- Hours:48 hours LEC; 72 hours LAB
- Prerequisite:None.
- Catalog Date:January 1, 2025
This is an introductory course to smart computing system repair. The course will begin with an overview of the history of computing systems and repair. Information of common computer system repair, nomenclature, diagnostic software, and the theory of computing systems operations will be covered. The course will also introduce the student to the use of the Internet for locating technical repair documentation on the Web.
ET 141 Smart Computing Device System Repair II
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:ET 140 with a grade of "C" or better
- Catalog Date:January 1, 2025
This is a second course in a series of two designed to train students in the advanced skills needed in the installation, maintenance, and repair of modern computer smart devices and systems.
ET 192 Introduction to Robotics
- Units:2
- Hours:18 hours LEC; 54 hours LAB
- Prerequisite:None.
- Catalog Date:January 1, 2025
This course is an introduction to robotics utilizing various robotic systems. It explores how robots and microcontrollers interface with common electronic applications. It also investigates various applications for robots and microcontrollers. One or two field trips to local manufacturing facility such as Siemens Transportation may be required.
ET 210 Applied Mathematics for Electronics
- Units:3
- Hours:54 hours LEC
- Prerequisite:None.
- Catalog Date:January 1, 2025
This is a basic course for those interested in cabling and installation electronics who do not meet the requirements for ET 314. Units of instruction include DC and AC circuit application mathematics, scientific calculators, powers of ten, and introduction to algebraic concepts as related to electronics.
ET 220 A Survey of AC and DC Circuit Fundamentals
- Units:5
- Hours:54 hours LEC; 108 hours LAB
- Prerequisite:ET 210 and 230 with grades of "C" or better or equivalent.
- Catalog Date:January 1, 2025
This course is designed to provide instruction in the basic concepts of AC and DC theory including a study of resistors, capacitors, and inductors in series and parallel circuits. Laboratory use of meters, oscilloscopes, signal generators, and power supplies will be emphasized.
ET 230 Laboratory Practices and Techniques
- Units:1
- Hours:54 hours LAB
- Prerequisite:None.
- Advisory:Concurrent enrollment in ET 210.
- Catalog Date:January 1, 2025
This course provides instruction in the language of electronics, safe and efficient use of tools, equipment, and chemical processes used in the laboratory including: high voltage precautions, printed circuit fabrication, equipment panel fabrication silkscreen, and state-of-the-art soldering techniques.
ET 240 A Survey of Semiconductor Theory
- Units:5
- Hours:54 hours LEC; 108 hours LAB
- Prerequisite:ET 220 with a grade of "C" or better or equivalent.
- Catalog Date:January 1, 2025
This course provides a survey of diodes, transistors, FET's, and linear and digital IC's and how they are installed and used in modern electronic equipment. Laboratory will stress the hands-on manufacturing and troubleshooting of modern electronic equipment.
ET 295 Independent Studies in Electronics Technology
- Units:1 - 3
- Hours:54 - 162 hours LAB
- Prerequisite:None.
- Catalog Date:January 1, 2025
Independent study of an electronic topic or research project. This course is for students who wish to develop an in-depth understanding in fundamental topics of electronics technology and learn to work in a collaborative atmosphere with instructors and other students. Instructor approval is required to enroll in this course.
ET 299 Experimental Offering in Electronics Technology
- Units:0.5 - 4
- Prerequisite:None.
- Catalog Date:January 1, 2025
This is the experimental courses description.
ET 305 DC/AC Theory and Circuit Fundamentals
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:None.
- Corequisite:ET 306 and 314
- Transferable:CSU
- Catalog Date:January 1, 2025
This course is designed to provide instruction in the concepts of DC and AC theory including a study of the composition of matter, circuit fundamentals, voltage, current, resistance in series, parallel, and combination circuit configurations. Laboratory activities provide hands-on projects that include operation and use of electronic equipment used by industry.
ET 306 Electronics Fabrication and Soldering Techniques
- Units:2
- Hours:18 hours LEC; 54 hours LAB
- Prerequisite:None.
- Advisory:Successful completion of or concurrent enrollment in ET 305.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course covers the skills needed for identification and the safe and efficient use of hand tools and soldering equipment used in basic electronics repair. Familiarization with fabrication, soldering/de-soldering techniques, electrostatic discharge (ESD), assembly, and safety practices are covered.
ET 314 Mathematics for DC/AC Theory and Circuit Fundamentals
- Units:3
- Hours:54 hours LEC
- Prerequisite:One year of high school algebra with a grade of "C" or better, or qualifying mathematics assessment test scores or equivalent.
- Corequisite:ET 305
- Transferable:CSU
- General Education:AA/AS Area II(b)
- Catalog Date:January 1, 2025
This course focuses on the application of and analysis by algebra and trigonometry to solve electronic problems in DC and AC circuits. This course was formerly known as ET 310 and ET 311.
ET 315 Mathematics for Semiconductor Theory
- Units:3
- Hours:54 hours LEC
- Prerequisite:ET 305, 306, and 314 with grades of "C" or better; or equivalent.
- Advisory:Concurrent enrollment in ET 322 and 335.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course provides a detailed study of the mathematics required to solve problems in semiconductor circuit theory. Some of these math functions include: vector algebra, load line plotting, decibel theory and application, common and natural log functions, power supply analysis, calculation of input and output bandwidth characteristics of semiconductor amplifiers, use of rate-of-change functions to study slope of lines and their relationship to amplifier impedances, and use of network theorems to simplify complex biasing networks for amplifiers.
ET 322 Semiconductors and Nanotechnology
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:ET 305 with a grade of "C" or better
- Corequisite:ET 314; completion of or concurrent enrollment in ET 314
- Transferable:CSU
- Catalog Date:January 1, 2025
This course is a detailed study of semiconductor devices and their applications. Semiconductor components - such as diodes, transistors, op-amps, including their use in complex circuits - are covered. Nanotechnology theory and devices, including their present and possible future applications, are studied. One or two field trips may be required. This course was formerly known as ET 320.
ET 335 Integrated Circuits with Computer Applications
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:ET 305 with a grade of "C" or better
- Transferable:CSU
- Catalog Date:January 1, 2025
This course covers integrated circuits (ICs) and applications used in industrial and consumer products. Topics include digital theory and applications from standard transistor-transistor logic (TTL) logic circuits to complex circuits built on programmable logic devices (PLDs). One or two field trips may be required. This course was formerly known as ET 330.
ET 340 Basic Microprocessors
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:January 1, 2025
This is a beginning course dealing with the circuitry and use of the microprocessor. Peripheral hardware is also considered so that the student may gain an overview of a complete computer system. The scope of the course includes machine language programming in order to provide a base for understanding the dynamic operation of the entire system. Troubleshooting philosophy is emphasized.
ET 350 Receiver Circuits
- Units:5
- Hours:54 hours LEC; 108 hours LAB
- Prerequisite:ET 315, 322, and 335 with grades of "C" or better or equivalent.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course focuses on the principles of radio receivers using AM, FM, and single sideband modulation systems. The course presents associated control circuits and power supply circuitry for receivers.
ET 360 Electronic Servicing and Calibration Techniques
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:ET 315, 322, and 335 with grades of "C" or better or equivalent.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course focuses on developing familiarization with laboratory and test instruments and techniques of calibration and repair. It is a practical step-by-step approach for the beginning technician in the art of troubleshooting techniques on all the electronic equipment available in the electronics laboratory.
ET 362 Modern Electronic Control Technology
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Corequisite:ET 305; or prior completion of with a grade of “C” or better.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course introduces the principles and applications of automatic control systems. Topics include general feedback control systems, analog control systems, digital control systems, Programmable logic controller (PLC) systems, sensors, and actuators. One or two field trips may be required.
ET 380 Introduction to Electronic Communications
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:ET 314 and 322 with grades of "C" or better
- Transferable:CSU
- Catalog Date:January 1, 2025
This course covers electronic communications including UHF, VHF, microwave, satellite, and fiber optics. AM and FM transmitters, transmission lines, antennas, and receivers are analyzed down to the component level. Propagation, wave theory, decibels, and signal transmission limitations are also covered. Technician safety and proper test equipment use are stressed throughout the course. Field trips may be required.
ET 381 Electronic Communication Regulations
- Units:3
- Hours:54 hours LEC
- Prerequisite:ET 322 with a grade of "C" or better
- Advisory:ET 380 with a grade of "C" or better
- Transferable:CSU
- Catalog Date:January 1, 2025
This course provides an overview of the Federal Communication Commission (FCC) General Radiotelephone license requirements. It also covers the electronics theory and the rules and regulations mandated by the FCC.
ET 390 Microprocessor Systems - Troubleshooting
- Units:3
- Hours:18 hours LEC; 108 hours LAB
- Prerequisite:ET 340 with a grade of "C" or better or equivalent.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course will focus on the principles of microprocessor system control and troubleshooting. Study will include measurement transducers, analog-to-digital and digital-to-analog converters, power supplies, and power users. The design, construction, repair, and operation of a semester lab project controlled by a microprocessor, microcontroller, or a smart digital device will be covered.
ET 400 Microwave Communications Techniques
- Units:4
- Hours:54 hours LEC; 54 hours LAB
- Prerequisite:ET 315, 322, and 335 with grades of "C" or better or equivalent.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course is a study of electromagnetic waves and antennas. The course presents types of microwave generators, microwave communications systems, and antenna guidance systems. The use of lasers and fiber optics in communications systems and as a source of high tech energy control are presented.
ET 410 Transmitter Fundamentals
- Units:5
- Hours:54 hours LEC; 108 hours LAB
- Prerequisite:ET 315, 322, and 335 with grades of "C" or better or equivalent.
- Transferable:CSU
- Catalog Date:January 1, 2025
This is a fundamental course in AM/FM and single side-band transmitters. The course will present students with preparation for employment in the communications industry. It will include instruction in adjustment and tuning of transmitters. Students are presented with symptoms of malfunctions and remedies in troubleshooting transmitters.
ET 491 Electronics Projects Laboratory I
- Units:2
- Hours:108 hours LAB
- Prerequisite:None.
- Corequisite:ET 306; Students may have completed ET 306 previously.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course provides an opportunity for students to pursue typical electronics projects to learn and practice skills needed in the construction, installation, maintenance, and repair of electronic devices.
ET 492 Electronics Projects Laboratory II
- Units:2
- Hours:108 hours LAB
- Prerequisite:None.
- Corequisite:ET 306; Students may have completed ET 306 previously.
- Transferable:CSU
- Catalog Date:January 1, 2025
This course provides an opportunity for students to develop and practice skills necessary for the construction, installation, maintenance, and repair of electronic devices. Students will develop, design, and construct a project under the guidance of the instructor.
ET 494 Topics in Electronics Technology
- Units:0.5 - 4
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:January 1, 2025
This is a specialized course developed in cooperation with industry to address emerging training needs. Units are awarded on the basis of .5 unit for each 9 hours of lecture or 27 hours of lab.
ET 495 Independent Studies in Electronics Technology
- Units:1 - 3
- Hours:54 - 162 hours LAB
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:January 1, 2025
Independent study of an electronic topic or research project. This course is for students who wish to develop an in-depth understanding in fundamental topics of electronics technology and learn to work in a collaborative atmosphere with instructors and other students. Instructor approval is required to enroll in this course.
ET 499 Experimental Offering in Electronics Technology
- Units:0.5 - 4
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:January 1, 2025
This is the experimental courses description.